205Ah Absolute Sensor Boot Value (in User Units) Function Tip: This object only has a function when using an absolute encoder. If an absolute encoder is not used, the value is always 0. The initial encoder position when switching on the controller (in user-defined units) can be read from this object. Object description Index 205Ah Object name Absolute Sensor Boot Value (in User Units) Object Code VARIABLE Data type INTEGER32 Savable no Access read only PDO mapping no Allowed values Preset value 00000000h Firmware version FIR-v1446 Change history Firmware version FIR-v1512: "Access" table entry for subindex 00 changed from "read/write" to "read only". Firmware version FIR-v1738-B501312: "Object Name" entry changed from "Encoder Boot Value" to "Absolute Sensor Boot Value (in User Units)". Firmware version FIR-v1738-B501312: "Data type" entry changed from "UNSIGNED32" to "INTEGER32".