clear combination
active combination
back to configurator

Brakes for BLDC and Stepper Motors

Stepper motor brakes and bldc motor brakes

Nanotec offers two types of holding brakes: Permanent-magnet brakes and electrically operated spring-loaded brakes. They are designed for an operating voltage of 24 VDC and have a holding torque from 35 to 200 Ncm. All brakes are wear resistant and also suitable for operation in harsh environment conditions (IP54). 

The Nano brake module (PWM controller) reduces the power and heat losses oft the brakes by 35%, thus increasing the running time and the service life of the motor. An external anti-surge diode is not required.
 

Brakes for BLDC and Stepper Motors  –  Products

Permanent magnet brake for stepper motors and brushless dc motors

BKE – Permanent-magnet brake

In the BKE brake, the braking force is applied by means of a permanent magnet. The brake is available in three sizes and designed for shaft diameters of 5 and 6.35 mm.
  • Holding Torque (Brake)  -
  • Operating Voltage (Brake) 24 VDC
  • Shaft Diameter  -
  • Rated Power 8 W - 11 W
  • Size  -
Spring-loaded brake for stepper motors and brushless dc motors

BWA – Spring-loaded brake

The BWA brakes are electrically operated spring-loaded brakes designed for use as static holding brakes. They are available in two sizes and can be mounted directly on the motor.
  • Holding Torque (Brake)  -
  • Operating Voltage (Brake) 24 VDC
  • Shaft Diameter  -
  • Rated Power 5.9 W - 11 W
  • Size  -
nema 23 holding brake - for bldc and stepper motors

BCD – Spring-loaded brake

The BCD brake is designed as a holding brake for BLDC and stepper motors with flange size NEMA 23/24. It comes with its own shaft and an NEMA 23 flange and is attached to the front of the motor.
  • Holding Torque (Brake)
  • Operating Voltage (Brake) 24 VDC
  • Shaft Diameter
  • Rated Power 7.2 W
  • Size

Brakes for BLDC and Stepper Motors  –  Filter

Please wait while productfinder is loading ...

{{ curve.panelTitle }}

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Recommended load limit
Continuous Operation
Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
  • {{ attribute.label }}

{{ curve.panelTitle }}

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Recommended load limit
Continuous Operation
Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
  • {{ attribute.label }}

{{ curve.panelTitle }}

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Recommended load limit
Continuous Operation
Force [N] at {{ curve.comparePoint | number : 2 }} mm/s Speed [mm/s] at {{ curve.comparePoint | number : 2 }} N
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
  • {{ attribute.label }}
Instructions/Help Share results
{{ pfinder.totalResults }} Results Filter

{{ pfinder.totalResults }} Results

Show