clear combination
active combination
back to configurator

Damper

Damper

The D28, D40 and D56 dampers from Nanotec can be mounted on all stepper motors with a double shaft (size 28-59 mm). Apart from the improved settling time, system resonance is suppressed and vibration and motor noise in the lower speed range are greatly reduced.

In case of device-specific resonance and noise problems, putting the motor into operation is made considerably easier by using a damper

Damper  –  Products

Damper

Damper – For B shaft

The D28, D40 and D56 dampers can be mounted on all stepper motors with a double shaft (size 28-59 mm).  Apart from the improved settling time, system resonance is suppressed and vibration and…
  • Corresponding Motors ST28, ST35, ST41, ST42, ST59 
  • Suitable for (Damper) for B-Shaft 
Damper

Damper – For mounting flange

Between the two flange rings, the ZD-DF damper has a layer of vulcanized-on rubber for suppressing body-borne sound, which can be reduced by approx. 3-10 dB(A), depending on the frequency. Owing to…
  • Corresponding Motors ST41, ST42, ST59 
  • Suitable for (Damper) for Mounting Flange 

Damper  –  Filter

Please wait while productfinder is loading ...

{{ curve.panelTitle }}
Recommended load limit
Continuous Operation
Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}

{{ curve.panelTitle }}
Recommended load limit
Continuous Operation
Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}

{{ curve.panelTitle }}
Recommended load limit
Continuous Operation
Force [N] at {{ curve.comparePoint | number : 2 }} mm/s Speed [mm/s] at {{ curve.comparePoint | number : 2 }} N
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
Instructions/Help Share results
{{ pfinder.totalResults }} Results Filter

{{ pfinder.totalResults }} Results

Show

Do you have any questions?

Our sales team is happy to answer any questions you may have about our products.

Contact Sales