PD6-E/-EB-M EtherCAT Online Manual

Safety and warning notices

CAUTION:
  • Risk of overheating or fire if there is insufficient cooling!
  • If cooling is insufficient or if the ambient temperature is too high, there is a risk of overheating or fire.
  • ► During use, make certain that the cooling and environmental conditions are ensured.
  • ► With respect to the installation position of motor PD6-EB..., ensure that the cooling fins provide maximum heat dissipation.
Note:
  • Damage to the controller due to excitation voltage of the motor!
  • Voltage peaks during operation may damage the controller.
  • ► Install suitable circuits (e. g., charging capacitor) that reduce voltage peaks.
Note:
  • Damage to the electronics through improper handling of ESD-sensitive components!
  • The device contains components that are sensitive to electrostatic discharge. Improper handling can damage the device.
  • ► Observe the basic principles of ESD protection when handling the device.
Note:
  • Damage to the electronics if the supply voltage is connected with reversed polarity!
  • Polarity reversal results in a short-circuit between supply voltage and GND (earth) via the power diode.
  • ► Observe the Pin assignment.
  • ► Install a line protection device (fuse) in the supply line.
▶   next

Contents