- No parity: 2 stop bits
- "Even" or "Odd" parity: 1 stop bit
The following baud rates are supported:
The PD4-E is equipped with a hex coding switch – similar to that shown in the following figure.
You can thereby determine the source for the slave address, the baud rate and the parity; the following table shows the possible combinations.
|Position of the rotary switch||Slave address||Baud rate and parity|
|0||0||Object 2028h||Object 202Ah or 202Dh|
|1-14||1-E||Number of the rotary switch||Object 202Ah or 202Dh|
|15||F||5||19200, even Parity|