6073h Max Current Function Contains the maximum current in tenths of a percent of the set rated current entered in 320Eh:0Ah. Is limited by the maximum motor current (2031h). See also I2t Motor overload protection. Note: For stepper motors, only the rated current is specified, not a maximum current. The value of 6073h should therefore not exceed the value 1000 (100%). Object description Index 6073h Object name Max Current Object Code VARIABLE Data type UNSIGNED16 Savable yes, category: drive Access read / write PDO mapping RX-PDO Allowed values Preset value 03E8h Firmware version FIR-v1825-B577172 Change history Description The maximum current is calculated in tenths of a percent of the rated current as follows: (6073h*203Bh:01)/1000 The maximum current determines: the maximum current for the I2t Motor overload protection the rated current in open loop mode. Note: The maximum current also affects the control behavior in closed loop mode (see Controller structure). If you change the maximum current, you must also proportionally adjust the value of 320Eh:09h.