1011h Restore Default Parameters Function This object can be used to reset all or part of the object dictionary to the default values. Object description Index 1011h Object name Restore Default Parameters Object Code ARRAY Data type UNSIGNED32 Savable no Firmware version FIR-v1426 Change history Firmware version FIR-v1436: "Object Name" entry changed from "Restore Default Parameter" to "Restore Default Parameters". Firmware version FIR-v1436: The number of entries was changed from 2 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1512: "Name" entry changed from "Restore The Comm Default Parameters" to "Restore Communication Default Parameters". Firmware version FIR-v1512: "Name" entry changed from "Restore The Application Default Parameters" to "Restore Application Default Parameters". Firmware version FIR-v1540: The number of entries was changed from 5 to 7. Value description Subindex 00h Name Highest Sub-index Supported Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 06h Subindex 01h Name Restore All Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 02h Name Restore Communication Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 03h Name Restore Application Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 04h Name Restore Customer Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 05h Name Restore Drive Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 06h Name Restore Tuning Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Description If the value 64616F6Ch (or 1684107116d or ASCII load) is written in this object, part or all of the object dictionary is reset to the default values. The subindex that is used decides which range is reset. For a detailed description, see chapter Discarding the saved data.
1011h Restore Default Parameters Function This object can be used to reset all or part of the object dictionary to the default values. Object description Index 1011h Object name Restore Default Parameters Object Code ARRAY Data type UNSIGNED32 Savable no Firmware version FIR-v1426 Change history Firmware version FIR-v1436: "Object Name" entry changed from "Restore Default Parameter" to "Restore Default Parameters". Firmware version FIR-v1436: The number of entries was changed from 2 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1512: "Name" entry changed from "Restore The Comm Default Parameters" to "Restore Communication Default Parameters". Firmware version FIR-v1512: "Name" entry changed from "Restore The Application Default Parameters" to "Restore Application Default Parameters". Firmware version FIR-v1540: The number of entries was changed from 5 to 7. Value description Subindex 00h Name Highest Sub-index Supported Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 06h Subindex 01h Name Restore All Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 02h Name Restore Communication Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 03h Name Restore Application Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 04h Name Restore Customer Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 05h Name Restore Drive Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 06h Name Restore Tuning Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Description If the value 64616F6Ch (or 1684107116d or ASCII load) is written in this object, part or all of the object dictionary is reset to the default values. The subindex that is used decides which range is reset. For a detailed description, see chapter Discarding the saved data.
Function This object can be used to reset all or part of the object dictionary to the default values.
Object description Index 1011h Object name Restore Default Parameters Object Code ARRAY Data type UNSIGNED32 Savable no Firmware version FIR-v1426 Change history Firmware version FIR-v1436: "Object Name" entry changed from "Restore Default Parameter" to "Restore Default Parameters". Firmware version FIR-v1436: The number of entries was changed from 2 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1512: "Name" entry changed from "Restore The Comm Default Parameters" to "Restore Communication Default Parameters". Firmware version FIR-v1512: "Name" entry changed from "Restore The Application Default Parameters" to "Restore Application Default Parameters". Firmware version FIR-v1540: The number of entries was changed from 5 to 7.
Value description Subindex 00h Name Highest Sub-index Supported Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 06h Subindex 01h Name Restore All Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 02h Name Restore Communication Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 03h Name Restore Application Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 04h Name Restore Customer Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 05h Name Restore Drive Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 06h Name Restore Tuning Default Parameters Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h
Description If the value 64616F6Ch (or 1684107116d or ASCII load) is written in this object, part or all of the object dictionary is reset to the default values. The subindex that is used decides which range is reset. For a detailed description, see chapter Discarding the saved data.
