PD2-O4118S1404-2 —  Stepper Motor with Integrated Controller - NEMA 17

Availability

  • 3 in Stock
  • More articles available after 7/Feb/2019. Larger quantities on request.

Technical Data

  • Size
  • Interface RS485 
  • Operating Voltage 12 VDC - 24 VDC
  • Peak Current (RMS) 2.7 A
  • Type of Digital Inputs 5 V 
  • Type of Analog Input -10 - +10 V 
  • Type of Digital Output open-drain (30 V max.) 
  • Length "A"
  • NEMA 17 
  • Holding Torque
  • Rated Current (RMS) 1.8 A
  • Number of Digital Inputs
  • Number of Analog Inputs
  • Digital Outputs
  • with Encoder  
  • Weight 0.21 kg

Dimensions

PD2-O4118

Torque Curves

{{axis.legendLabel}}
{{dataRow.datarowName}}  

Knowledge Base

Brushless direct current motors, abbreviated as BLDC motors, are – despite their name –  three-phase current synchronous machines: the rotor follows a magnetic rotational field and the movement is synchronous to the AC voltage applied to the windings. This motor type is frequently referred to as "brushless direct current motor" because, in many applications, it replaces direct current motors with brushes (brushed DC or commutator...
More details

If communication is no longer possible with the motor controller or the motor after a failed firmware update, the firmware can be uploaded manually.

Firmware updatefor downloading: Firmwareupdate.zip

The motor controllers and Plug & Drive motors have open collector outputs. To switch a load or PLC, you require a relay according to this circuit diagram. The flyback diode is required. Please note the maximum switching current or the maximum voltage of the selected motor controller. You can find this information in the respective manual.

SMCI35: A load/PLC cannot be connected with this motor controller.

Depending on the cable type, routing and length, an overcoupling onto the neighboring control line may occur with 24-V control signals. In motor controllers with wide range inputs (5–24V), this can cause a second input that is not activated to be recognized as high. To prevent this without having to change the wiring (which can be an involved process), the following suppression circuit can be provided at each input in use. Inputs that are not required can be connected directly to the motor controller ground.


Accessories

Z-K4700/50 Charging Capacitor $ 5.89
ZK-RS485-USB Converter RS485-USB $ 98.76
ZK-SMCI12 RS485 Connection Cable $ 109.83
ZK-SMCI12-IO Connection Cable without Interface Connector $ 26.02

Order & Configure

Order information

$ 169.05

Availability

  • 3 in Stock
  • More articles available after 7/Feb/2019. Larger quantities on request.