PD6-CB87S048030-E-09 – Brushless DC motor with integrated controller – NEMA 34 and flange size 80 mm
Volume Discount
- 1 - {{ pna.data.discounts[0].amount - 1 }}
- {{ discount.amount }}+
Single Price
Volume Discount
For quantities greater than 10, please contact us for volume pricing.
Availability
- Our delivery time for this article will be appr. 10 to 12 weeks.
- The delivery time for this article will be appr. 2 weeks if all components are in stock.
Under „Downloads“ you will find the technical manual that corresponds with the stock firmware. Please refer to the new technical manual and the document “Instructions for Firmware Update to Version FIR-v2039” when using Plug & Drive Studio 2.
Please click on „Combine Article” or the plus sign to start the configurator.
Technical Data
-
Size
-
Fieldbus CANopen
-
Operating Voltage 12 VDC - 48 VDC
-
Rated Torque
-
Rated Current (RMS) 6.25 A
-
Number of Digital Inputs 6
-
Number of Analog Inputs 2
-
Number of Digital Outputs 2
-
Encoder
-
Encoder Resolution 1024 CPR
-
Weight
-
NEMA 34
-
Interface USB
-
Rated Power 220 W
-
Rated Speed 3000 rpm
-
Peak Current (RMS) 20 A
-
Type of Digital Inputs 5/24 V switchable
-
Type of Analog Input 0 - 10 V, 0 - 20 mA / 0 - 10 V switchable
-
Type of Digital Output open-drain (max. 24 V/100 mA)
-
Encoder Type single-turn absolute
-
Length
Dimensions

Creation in progress ...
Torque Curves
|
Recommended load limit
|
Continuous Operation
|
||
---|---|---|---|---|
|
|
Downloads
Datasheets
Manuals
- PD6-C CANopen/USB Technical Manual (pdf, 5 MB)
- Functional Description Plug & Drive-Interface (pdf, 316 KB)
- Instructions for Firmware Update to Version FIR-v2039 (pdf, 624 KB)
- PD6-CB CANopen/USB Quick Guide (pdf, 431 KB)
- PD6-C CANopen/USB Technical Manual Stock Firmware (pdf, 5 MB)
- PD6-C CANopen/USB Technical Manual
Certificates
Knowledge Base
NanoJ is a programming language that is integrated in the Plug & Drive Studio software.
The examples and the Application Note show you how the NanoJ Library simplifies the use of the CiA 402 Power State Machine. The functions of the library are contained in a single header file, which you can easily add to your NanoJ project in Plug & Drive Studio.
Our application notes show you how to use NanoJ code templates for the individual configuration of Nanotec motor controllers.
Closed-loop field-oriented control is a method of running stepper motors much like a servo motor, i.e. smoothly, with low resonance and position-controlled.
Accessories
ZCPHOFKC-2,5HC-2 | Connector Power |
|
||
ZCPHOFK-MC0,5-12 | Connector |
|
||
ZK-MICROUSB | Micro USB cable, 1.5m |
|
||
Z-K10000/100 | Capacitor |
|