clear configuration
active configuration
back to configurator

Motor Controllers/Drives

Nanotec offers a new generation of intelligent, fully programmable servo drives with a wide power range and various fieldbus options. 

  • Designed for brushless DC motors and stepper motors 
  • Field-oriented control with encoder, Hall sensors or sensorless
  • 12 – 72 V DC operating voltage
  • 72 to 850 W rated power
  • Also available as motor with integrated controller 
  • CANopen, EtherCAT, EtherNet/IP, Modbus (RTU and TCP)

Our proven generation of SMCI/SMCP controllers are ideal for simple designs and available only with RS485 and/or CANopen interface.

 

 

Highlights

Maximum performance

Field-oriented torque, speed and position control provides optimum dynamic performance and cycle time –in combination with acceleration feed forward and jerk-limited ramps.

Flexible control

Control via fieldbus, clock/direction or digital/analog inputs or integration in an existing control concept are among the options to choose from. Stand-alone operation is also possible.

Easy to program

The controllers are quick and easy to parameterize and program with the free software Plug & Drive Studio. Via the integrated oscilloscope, all values can be observed in a millisecond cycle.

Categories for Motor Controllers/Drives

C5 – Open-loop stepper motor controller

Controller for openloop operation of stepper motors with a size of NEMA 17 to NEMA 34. Control via clock-direction or through speed or position specification via the analog input. Quick and simple...
  • Operating Voltage 12 VDC - 48 VDC
  • Rated Current (RMS) 6 A
  • Peak Current (RMS) 6 A
  • Corresponding Motors Stepper Motors 
  • Interface USB, IO (clock direction; analog) 

C5-E – Motor controllers for CANopen, EtherCAT, EtherNet/IP, USB or Modbus RTU/TCP

Controller/drive for brushless DC motors and stepper motors with a flange size from NEMA 17 to NEMA 34. Available in a low-current version with 6 A rated current/6 A peak current and in a...
  • Operating Voltage 12 VDC - 48 VDC
  • Rated Current (RMS) 6 A - 10 A
  • Peak Current (RMS) 6 A - 30 A
  • Corresponding Motors Brushless DC motors, Stepper Motors 
  • Interface Modbus RTU, USB, IO (clock direction; analog), CANopen, EtherNet/IP, EtherCAT, Modbus TCP 

CL3-E – Motor controller for CANopen, Modbus RTU or USB

Controller/drive for brushless DC motors and stepper motors with a flange size of up to NEMA 23. Due to its small size (40 x 60 mm), this board is ideally suited for integration into devices such as...
  • Operating Voltage 12 VDC - 24 VDC
  • Rated Current (RMS) 3 A
  • Peak Current (RMS) 3 A - 6 A
  • Corresponding Motors Brushless DC motors, Stepper Motors 
  • Interface CANopen, Modbus RTU, USB, IO (clock direction; analog) 

N5 – Motor controllers for CANopen, EtherCAT, EtherNet/IP or Modbus RTU/TCP

Universal controller/drive for brushless DC motors and stepper motors. Available in a low-current version with 12-72 V operating voltage and 10 A rated current/10 A peak current as well as in a...
  • Operating Voltage 12 VDC - 72 VDC
  • Rated Current (RMS) 10 A - 18 A
  • Peak Current (RMS) 10 A - 40 A
  • Corresponding Motors Brushless DC motors, Stepper Motors 
  • Interface EtherCAT, CANopen, EtherNet/IP, Modbus TCP, Modbus RTU 

CL4-E – Motor controller for CANopen, Modbus RTU or USB

High-performance controller/drive for brushless DC motors and stepper motors. Available in a low-current version with 3 A rated current/6 A peak current and in a high-current version with 6 A rated...
  • Operating Voltage 12 VDC - 58 VDC
  • Rated Current (RMS) 3 A - 6 A
  • Peak Current (RMS) 6 A - 18 A
  • Corresponding Motors Brushless DC motors, Stepper Motors 
  • Interface CANopen, Modbus RTU, USB, IO (clock direction; analog) 

NP5 – Motor controller for CANopen, EtherCAT, Modbus RTU or SPI

Fieldbus-capable controller/drive for small BLDC and stepper motors. By means of a PCI Express connector, this plug-in controller can be integrated in a customer-specific board quickly and easily....
  • Operating Voltage 12 VDC - 48 VDC
  • Rated Current (RMS) 6 A
  • Peak Current (RMS) 10 A
  • Corresponding Motors Brushless DC motors, Stepper Motors 
  • Interface Modbus RTU, CANopen, EtherCAT, SPI 

Motor Controllers/Drives Product List

Please wait while productfinder is loading ...

{{curve.panelTitle}}

{{axis.legendLabel}}
Torque [Nm] at {{curve.comparePoint | number : 2}} rpm Speed [rpm] at {{curve.comparePoint | number : 2}} Nm
{{result.title}}
{{dataRow.max_power}}A {{dataRow.voltage}}V {{dataRow.wiring}} {{curve.calculateValueAtPoint(dataRow)}}

{{curve.panelTitle}}

{{axis.legendLabel}}
Force [N] at {{curve.comparePoint | number : 2}} mm/s Speed [mm/s] at {{curve.comparePoint | number : 2}} N
{{result.title}}
{{dataRow.max_power}}A {{dataRow.voltage}}V {{dataRow.wiring}} {{curve.calculateValueAtPoint(dataRow)}}
How to use the product finder Share results
{{pfinder.totalResults}} Results Filter

{{pfinder.totalResults}} Results

Show